41
3.1.18. Static FDB Table
Select "Basic Config" and "FDB" and then "FDB Manual Setting" to open the screen
shown in Figure 3-18. On this screen, you can manually register the MAC address
in the FDB table.
Figure 3-18 FDB Manual Setting
Screen Description
Add
Click the "Add" button, and the information specified in the following items will be
registered with the FDB table.
Port
Select a port to which a MAC address is to be added.
VLAN ID
Select the VLAN ID of a MAC address to be added.
MAC Address
Enter the MAC address to be added.
Remove
Displays the list of manually registered FDB entries.
Click the "Next Page" and "Previous Page" buttons, and the display range of the list
will be switched.
Select the entry to be deleted and click the "Remove" button, and it will be
removed from the FDB table.
Click the "Select All" button, and all entries will be selected.
Click the "Reset" button, and all entries will be deselected.
