22
3.1.4. SNMP Extend User Config
Select "Basic Config," "SNMP," and then "SNMP Extend User Config" to open the
screen shown in Figure 3-4. On this screen, you can configure the SNMP manager
settings.
Figure 3-4 SNMP Extend User Config
Screen Description
Total Entry
Displays the number of created SNMP users (number of indexes) .
Index
This is the entry number of the SNMP user.
User Name
Displays the name of the SNMP user.
Group Name
Displays the name of the SNMP group.
Authentication
Displays the authentication method. The following options are used: "none,"
"MD5," and "SHA."
Authentication
Key
Sets an authentication key. Specify "Password" or "Key," and enter a password or
key.
Privilege
Displays the encryption system. The options "none" and "DES" are used.
Privilege Key
Sets a privilege key. Specify "Password" or "Key," and enter a password or key.
IP Address
Displays the IPv4 address accessible via SNMP.
IPv6 Address
Displays the IPv6 address accessible via SNMP.
