Panasonic Panafax UF-5300, Service Manual

Page: 207 / 274

207
18 OP CALL TIMER 1 20 SEC Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto
Switching mode.
2 30 SEC
3 40 SEC
4 50 SEC
19 OGM LENGTH
(TAM I/F)
1 1 SEC Setting the OGM length of your TAM from 1 to 60
seconds.
The machine will not start to detect SILENCE until the
time setting has lapsed.
(Default = 20 sec.)
--- ---
60 60 SEC
20 SILENT
DETECTION
(TAM I/F)
1 INVALID Selecting the Silent Detection Mode.
2 VALID
22 SUBSTITUTE
RCV
1 INVALID Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording
paper is jammed.
2 VALID
23 REC. PAPER
SIZE
1 A4 Setting the recording paper size installed in your
machine.
2 LETTER
3 LEGAL
24 PRINT
REDUCTION
1 FIXED Selecting print reduction mode.
Fixed : Reduce received document according to setting
of Parameter No. 25.
Auto : Reduce received document according to the
length of received documents.
2 AUTO
25 REDUCTION
RATIO
70 70% Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction
is selected on Fax Parameter No. 24.
---- ----
100 100%
26 POLLING
PASSWORD
(----) Setting a 4-digit password for secured polling.
27 POLLED FILE
SAVE
1 INVALID Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2 VALID
28 STAMP AT MEM.
XMT
1 INVALID Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
2 VALID
31 INC. FILE SAVE 1 INVALID Selecting whether the machine retains the document in
the memory if the document is not successfully
transmitted.
2 VALID
32 COPY
REDUCTION
1 MANUAL Selecting whether the machine performs the copy
reduction ratio automatically or manually.
MANUAL: The machine will prompt you for the Zoom
ratio (100% to 70%) when making copies.
AUTO : The machine will automatically determine the
reduction ratio according to the length of the
original document.
2 AUTO
No. Parameter
Setting
Number
Setting Comments