47
Special
Features
Special
Features
EVF or LCD monitor indication.
Press BACK LIGHT in Record mode to
activate the Backlight feature.
The Indicator “
” will appear in the EVF or
LCD monitor.
Press BACK LIGHT again to cancel
the Backlight feature.
Backlight
BACK LIGHT Button
• The Indicator “
” will not appear in the
EVF or LCD monitor when OFF is
selected in the DISPLAY menu.
Note
Use Manual Focus (MF) when recording ...
• a subject through glass.
• a scene where the subject is far from the
Palmcorder and there are objects in the foreground.
• a subject with distinct horizontal stripes.
• a subject not centered in the Viewfinder.
• subjects with shiny surfaces.
• an obliquely angled subject.
• a bright, flat subject such as a white wall.
• in low light situations.
• a scene with fast motions, like a golf swing.
Re-focusing may be required
• when your Palmcorder is aimed at a new scene.
1
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2
Press M.FOCUS DIAL so that “MF”
(Manual Focus) appears in the EVF
or the LCD monitor.
3
Press and hold POWER ZOOM “T”
side (Telephoto) until the lens is at
maximum zoom in.
4
Turn M.FOCUS DIAL until the picture
is in focus.
• It may be necessary to back away
from the subject to focus the image
properly.
5
Press POWER ZOOM to “W” or “T”
as desired.
• The subject will remain in focus over
the entire zooming range.
• It may be necessary to back away
from the subject to focus the image
properly.
Macro Focus (for close-ups)
Auto Focus
The Palmcorder automatically adjusts the focus over the entire zoom range.
Manual Focus
2, 4
M.FOCUS
DIAL
3, 5
POWER
ZOOM Switch
Press the “W” side of POWER ZOOM to the maximum wide angle position.
Auto Focus will function with the subject as close as 1 inch (25 mm) in front of the lens.
Use when recording a subject that is darker than the surrounding scene, in a shadowed
area, or when the light source is in back of your subject.
Special Features
Special Features
1
POWER Switch
• DISPLAY must be set to on for MF, AE,
W.BALANCE, or BACK LIGHT to be displayed
on the LCD or EVF.
Note
201_401.46-48.p65
01/01/18, 17:08
47
