Panasonic Omnivision PV-V4621, Service Manual, Page: 128 / 171

11
Press CH Key to start Channel/Clock
Auto Set operation. The Channel/Clock
Setting is performed automatically.
If the setup is completed, the following
screen appears.
If “Auto Clock Set is Incomplete”
screen appears, set the clock using
MANUAL CLOCK SET procedures
shown on page 9.
VCR C / A CLOCK CH
5 /13 / 20 0 1 SUN 2 : 20PM
END : CH UP KEY
DST : ON
SETT I NG : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET IS
INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
VCR C / A CLOCK CH
5
Confirm the output channel of your cable
box or DSS receiver. Press
Keys to
select the same channel as the cable box
or DSS receiver output channel. Press
to enter.
Turn on your cable box and set it to
your Public Broadcasting Station
(PBS) channel in your time zone.
If you use a DSS receiver, it must be
turned off.
6
CONNECT ANTENNA CABLE
LOCAL PBS CH THEN. . .
AND I F YOU USE A CABLE
BOX, TUNE I T TO YOUR
PLE ASE PRESS CH UP KEY
CHANNEL / CLOCK AUTO SET
VCR C / A CLOCK CHANNEL
Initial Setup
(Connection)
*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
POWER
SELECT/
SET
ACTION
CH /
:PLAY
:STOP
:REW
:FF
VCR
VCR/TV
V
C
R
+