Panasonic OmniVision PV-QV201, Service Manual

Page: 8 / 146

been pressed.
The 1st digit changes to "0" only when key is detected.
Fig. 1-7
4. When 1 to 4 listed in Lock code occurs, Lock data will be stored in the
EEPROM IC (Current data, Last Lock data, and the Last Lock data
before last). Lock data displayed in F.I.P. can be changed by pressing
CH DOWN button.
Fig. 1-8
Note:
1. Lock data will be kept after the AC Cord is unplugged.
2. When 1 to 4 listed in Lock code occurs for the first time, the VCR does
not go into VCR shut-off condition. If it occurs again within a minute,
the VCR goes into VCR shut-off condition. Then, the VCR stops and all
VCR function buttons except for power become non-operational.
(Without clock model in F.I.P.)
Simplified Self-Diagnostic System facilitates finding the cause of the fault. LED will light up or flash in
F.I.P.
The Simplified Fault finding data is stored in the Memory IC (IC6005). This data is cleared after it is
displayed, and then the POWER button is pressed back on.
1. With power turned off, press VCR/TV button on VCR (for over 3
seconds if VCR is not in shut off condition).
Fig. 2-1
8