Panasonic OmniVision PV-QV201, Service Manual

Page: 76 / 146

- Grounding Plate Unit (Ref. No. 57)
- Screw (Ref. No. 430)
- Flexible Flat Cable (Ref. No. 718)
- Main C.B.A. (Ref. No. E10)
When ordering these, be sure to confirm the modelnumber printed on
the Model No. Label and order the proper parts according to the
replacement parts list.
12.1.2. Mechanical Replacement Notes
1. Section No. of parts shown in Exploded Views are indicated in the
Remarks column.
2. Main Cam Gear is supplied as a Main Cam Gear Kit
(Ref. No. 8) only. Main Cam Gear Kit consists of a Main Cam Gear and
a Main Cam Push Nut. However, Main Cam Push Nut is available
separately as a replacement part.
3. The Infrared Remote Control Unit (Ref. No. 123) replacement part is
available as a complete assembly unit only. Do not try to disassemble
the Infrared Remote Control Unit. However, the battery cover is
available separately as a replacement part.
4. Main Cam Push Nut (Ref. No. 414) is not reusable.
If removed, install a new one.
12.1.3. Electrical Replacement Notes
1. Unless otherwise specified;
All resistors are in , K = 1,000 , M = 1,000 k .
2. Abbreviation
RTL:
Retention Time Limited
This indicates that the retention time is limited for this item. After the
discontinuation of this item inproduction, it will no longer be available.
NR:
Non Repairable Board Ass'y
MGF CHIP:
Metal Glaze Film Chip
C CHIP:
Ceramic Chip
76