Panasonic OmniVision PV-DR2714 Page 72 Operating Instructions Manual Download

Page: 72 / 92

Transfer (Dubbing) from Tape

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

PRESS AND HOLD DUBBING
FOR 3 SEC TO START

DUBBING

VCR

DVD

EP XP

With both VCR and DVD in Stop mode, press

DVD

and hold down for about 3 seconds after the OSD
below appears.

Dubbing stops automatically when tape playback is finished or at

disc end.

To end dubbing

Press STOP.
• When playback (source) side ends and unit enters Stop mode,

or, if dubbing is stopped due to an error, a message will briefly

appear.

Dubbing begins. Information is displayed on the

screen and sub display.

Sub Display

VCR side:

• Insert a cassette containing material to be dubbed.

DVD side:

• When using a cartridge style disc, confirm that it is not rewrite

prohibited.

• Be sure there is enough space on the disc to accommodate the

dubbing.

• Select the recording mode. (XP, SP, LP, or EP).
• Disengage the disc protect setting.

Preparation

One Touch Dubbing (Tape

DVD)

You can transfer (dubbing) programs recorded on a tape onto

a disc*1 with one stroke of the button. In One-Touch Dubbing,

programs are automatically dubbed onto the disc from the playback

location on the tape. If you want to transfer (dubbing) from the

desired point, see “Manual Dubbing” on next page.

Only DVD-RAM and non-finalized DVD-R discs can be used for transfer

(dubbing) from a tape. (see page 7.)

Note:

• Copy protected VHS tapes cannot be dubbed to a disc.

STOP

DVD REC

DVD

PLAY

PAUSE

Only the following operations are allowed while

transferring (dubbing)

• Stopping transfer (dubbing) by pressing STOP.
• Changing channels.

During dubbing, you can select and watch TV stations using NUMBER

keys and Channel

Ÿź

keys. To switch back to the dubbing picture,

press DVD or VCR. If it is the dubbing picture, CH is not displayed.

• Selecting input mode by pressing INPUT.
• Turning unit ON/OFF by pressing POWER. (Dubbing will

continue even if power is turned off.)

• Changing audio mode by pressing AUDIO.

DVD-R

RAM

REC MODE

AUDIO

DVD

NUMBER

keys

Ÿź

INPUT

VCR

Notes:

• While One Touch Transfer (Dubbing) is activated, timer recording cannot

be started.

• When the transfer (dubbing) is not started or not executed, the

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.

Tape rewinds to the beginning automatically.

Summary of Contents for OmniVision PV-DR2714





























































































Search results

Summary of Contents for OmniVision PV-DR2714

Reviews:

Related manuals for OmniVision PV-DR2714

Brands by name

Popular brands

Panasonic OmniVision PV-DR2714, Operating Instructions Manual

Search results

Summary of Contents for OmniVision PV-DR2714

Reviews:

Related manuals for OmniVision PV-DR2714

Brands by name

Popular brands