Panasonic OmniVision PV-DR2714 Page 65 Operating Instructions Manual Download

Page: 65 / 92

Disc Operation

Finalize

Press

Ÿź

to select “Finalize” and press ENTER.

Press

ŻŹ

to select “Yes” and press ENTER.

Press

ŻŹ

to select “Start” and press ENTER.

• Finalizing starts.
• A message appears when finalizing is finished.

Press

ENTER.

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-R

Finalize

Yes

This will take approximately ×× minutes.

Do you want to continue?

DISC SETTING

Disc Name

Disc Protection

Erase all titles

Format disc

Titles 11

Used 0:22

Free 5:38(EP)

DVD-R

Finalize

Start

Cancel

You will be unable to record on this disc

one it is finalized.

Are you sure you want to continue?

(Refer to “Finalize” on page 74.)

You can play DVD-R on compatible DVD players by finalizing

them on this unit, effectively making them into DVD-Video that

complies with DVD-Video standards.

DVD-R

(DVD-R recorded on this unit only)

Notes:

•

Do not disconnect the AC power supply cord while the message
“Finalizing the disc” is on the television. This will render the disc
unusable.

•  Finalizing takes up to 15 minutes.
•  You can only finalize DVD-R that were recorded on this unit.
•  You cannot record on DVD-R that have been finalized.
•

After finalizing

- The disc becomes play-only and you can no longer record or edit it.
- DVD-R finalized on this unit may not be playable on other DVD players

due to the condition of the recording.

- There is a pause of several seconds between titles.
- Titles are divided into about 5-minute* chapters.

* This time varies greatly depending on the condition and mode of

recording.

• Visit Panasonic’s homepage for more information about DVDs.
For

U.S.A.:

http://www.panasonic.com/playDVD-R

For

Canada:

http://www.panasonic.ca

Before finalizing

After finalizing

Disc display on this unit

DVD-R

DVD-V

Recording/Editing/ Entering
name

Play on other DVD players

DVD-R finalized on this unit may not be playable on other DVD players due
to the condition of the recording.

• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by

the unit or the disc.

Summary of Contents for OmniVision PV-DR2714





























































































Search results

Summary of Contents for OmniVision PV-DR2714

Reviews:

Related manuals for OmniVision PV-DR2714

Brands by name

Popular brands

Panasonic OmniVision PV-DR2714, Operating Instructions Manual

Search results

Summary of Contents for OmniVision PV-DR2714

Reviews:

Related manuals for OmniVision PV-DR2714

Brands by name

Popular brands