Others
-97-
[F] means Fine, [N] means
Normal and [E] means Economy.
-71-
, , , : MPEG4
Picture
Quality
-72-
0:
Remaining Number of Photoshot
pictures
R:0h00m:
Remaining time of MPEG4
:
Continuous Photoshot Recording
-72-
:
Lock Setting
-88-
¥
(White):
DPOF Setting completed (set to
1 or more picture)
-88-
:
[640
k
480] Image size
≥
For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
:
640 or more, less than 800 (The
size is not displayed at under
640 pixels.)
:
800 or more, less than 1024
:
1024 or more, less than 1280
:
1280 or more, less than 1600
:
1600 or more, less than 2048
:
2048 or more
(Cyan):
Photoshot Mode
(Red):
While Photoshot recording is
activated
(Green): While the card is
being read
(Red):
No Card (Still Picture Mode)
(Cyan):
Moving Picture (MPEG4)
Recording Mode
(Red):
While Moving Picture (MPEG4)
recording is activated
ª
To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indication [COUNTER]
(0:00.00), Memory Counter Indication [MEMORY]
(M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (
-66-
) By repeatedly
pressing the [DISPLAY] Button on the Remote
Controller, you can change the Counter Display
Mode.
ª
To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
-66-
)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª
To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
E
N
F
SF
640
640
SVGA
XGA
SXGA
UXGA
QXGA
PICTURE
PICTURE
PICTURE
PICTURE
MPEG4
MPEG4
All Function Display [ALL] and Minimum Display
[OFF]. (
-66-
)
ª
Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥
Digital Effect Modes in [EFFECT1]
≥
Digital Zoom [D.ZOOM]
≥
1/750 s or faster shutter speed
≥
When brightness is insufficient
≥
When the Night View Function is ON
≥
When the Portrait Mode is used
When using Card Recording Mode
≥
When brightness is insufficient
≥
When the Night View Function is ON
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1
Set [INITIAL] >> [INITIAL SET] >> [YES].
≥
The initializing takes a little while.
≥
After the initializing is completed, the
[COMPLETED] Indication appears with
beeps.
≥
Initializing will not erase the clock setting (
-69-
)
that has been adjusted.
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
3
DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred.
-105-
Y
(CHECK REC TAB/TAPE NOT INSERTED):
You are attempting to record pictures on a
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted.
-62-
6
(LOW BATTERY):
The Battery is low. Recharge it.
-60-
0
: The built-in battery is low.
-69-
:
(NEED HEAD CLEANING):
The video heads are dirty.
-106-
2
END (TAPE END):
The tape came to the end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected.
-60-
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape
55GC-ENG.book 97 ページ ２００４年２月２５日 水曜日 午後２時２１分
