Before Use
-64-
1
Rotate the Mode Dial
(43)
.
:Tape Recording Mode
Use this mode when recording pictures on a tape.
Also, you can record still pictures on the card
simultaneously during recording on a tape.
:Tape Playback Mode
Use this mode when playing back the recorded
scene on a tape.
:Card Recording Mode
Use this mode when recording still picture or
moving picture on a card.
:Picture Playback Mode
Use this mode when playing back the recorded
still picture on a card.
:MPEG4 Playback Mode
Use this mode when playing back the recorded
moving picture on a card.
:PC Mode
Use this mode when you want to connect the
Movie Camera to your Personal Computer.
Using the Viewfinder/LCD Monitor
ª
Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Pull the Viewfinder.
2
Adjust by turning the Eyepiece Corrector
Knob
(38)
.
To Use the Viewfinder at the Same Time as the
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥
The Viewfinder does not turn off even if the LCD
Monitor is opened.
≥
When you turn the Movie Camera off, this
setting is cancelled.
PC
S
D
(43)
PC
12:30:45
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
(38)
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Put a finger on the [OPEN
4
] Knob
(1)
and
pull the LCD Monitor
(2)
out in the direction
of the arrow.
≥
The Viewfinder is deactivated.
≥
The LCD Monitor can be opened a maximum
of 120
o
. If you open the LCD monitor by 120
o
,
it becomes convenient to operate menus or to
play back pictures.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥
The LCD Monitor can rotate a maximum of
180
o
1
from the vertical position upwards
and a maximum of 90
o
2
to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥
Make sure the Card Slot Cover is closed.
ª
Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
(2)
(1)
2
90
o
1
180
o
1
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
;
/
∫
:SELECT
&
/
%
:SETUP
!
/MENU:EXIT
LCD/EVF SETUP
55GC-ENG.book 64 ページ ２００４年２月２５日 水曜日 午後２時２１分
