Others
-125-
Multi-Picture Mode (VCR Mode)
≥
The quality of Multi images deteriorates
slightly.
≥
Playback Multi-Mode screens cannot
be output through the DV Terminal
(
-69-
).
≥
If there is input from DV Terminal, a
multi screen cannot be created.
≥
When signals are input from S-Video
Input/Output Socket or Audio-Video
Input/Output Socket, a Multi Screen
cannot be re-displayed.
≥
Signals input from S-Video
Input/Output Socket or Audio-Video
Input/Output Socket cannot be
displayed on a Multi Screen.
≥
If you switch the Movie Camera from
the Index Multi-Picture Mode over to
the Camera Mode, the setting of
[SCAN MODE] on the
[MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is
automatically set to [STROBE].
ª
Playing Back on Your TV
≥
If you set [AV JACK] on the
[AV IN/OUT SETUP] Sub-Menu to
[IN/OUT], nothing will be shown on the
TV screen except during playback.
≥
Picture size may be displayed
differently when playing back a Cinema
picture on a wide-screen TV with [B/W]
or [SEPIA] of Playback Digital Effect.
ª
Audio Dubbing
≥
The blank section of a tape cannot be
dubbed.
≥
Sounds sent through the DV Terminal
cannot be dubbed.
≥
If a tape has a non-recorded portion
when the tape is dubbed, images and
sounds may be disturbed when this
portion of the tape is played back.
≥
If you set the tape counter back to 0 at
the position where you want to stop
Audio Dubbing so as to make it
possible to use the Memory Stop
Function (
-136-
), Audio Dubbing is
terminated automatically when the tape
reaches this position.
≥
In the case of importing data recorded
with Audio Dubbing to a PC using the
PC’s software programme, only the
original sound (ST1) may be imported,
depending on the software programme.
ª
Recording the Contents of
Other Equipment
Recording to a Card
If you set the
[TAPE/CARD/CARD MODE] Selector to
[CARD], you can use the Card Photoshot
function for external input signals.
≥
Black streaks may appear at the
4 edges of the image.
≥
If the [VOICE] Indication is displayed,
recording to a Card is not possible.
Analog-Digital Conversion
≥
When the Movie Camera is connected
with other digital video equipment
through its DV Terminal, images
recorded in analog form from other
external equipment can be output to
the digital video equipment through the
DV Terminal.
≥
To DV-output analog video signals sent
from other equipment, set [DV OUT] on
the [AV IN/OUT SETUP] Sub-Menu to
[ON]. (Normally, keep the [DV OUT] set
to [OFF]. If it is set to [ON], the quality
of the image may be disturbed.)
ª
Using the DV Cable for
Recording
(Digital Dubbing)
≥
Regardless of the setting, digital
dubbing is carried out automatically in
the same audio recording mode as that
of the Cassette on the playback-side.
≥
The images on the monitor of the
recording side may be disturbed, but it
does not affect the recorded images.
≥
Even if Playback Digital Effects,
Playback Zoom, or Playback Title In
have been used, these effects are not
output from the DV Terminal.
≥
Even if you use device equipped with
DV Terminals (such as IEEE1394), you
may not be able to perform Digital
Dubbing in some cases.
≥
Date or other information to be
displayed cannot be displayed if the
software of the connected equipment
does not support the display function.
VQT0C47.book 125 ページ ２００３年１月２０日 月曜日 午後４時４９分
