Others
-134-
Playback (Pictures)
1: Pictures cannot be played back
even when the [
1
] Button is
pressed.
0
Is the [VCR] Lamp on? If the [VCR]
Lamp is not on, the playback function
cannot be used. (
-94-
)
2: Mosaic-pattern noise appears on
images during Cue, Review or Slow
Motion Playback.
• This phenomenon is characteristic of
digital video systems. It is not a
malfunction.
3: Although the Movie Camera is
correctly connected to a TV,
playback images cannot be seen.
• Have you selected “Video Input” on
the TV? Please read the operating
instructions of your TV and select the
channel that matches the input
sockets used for the connection.
4: Playback picture is not clear.
• Are the heads of the Movie Camera
dirty? If the heads are dirty, playback
image cannot be clear. (
-130-
)
Playback (Sound)
1: Sound is not played back from the
built-in speaker of the Movie
Camera or the headphones.
0
Is the volume too low? During
playback, keep pressing the [PUSH]
Dial until the [VOLUME] Indication
appears. Then, turn the [PUSH] Dial to
adjust the volume. (
-94-
)
2: Different sounds are reproduced at
the same time.
• [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu
of the [VCR FUNCTIONS] Main-Menu
has been set to [MIX]. As a result, the
original sound and sound that was
recorded by audio dubbing are played
back together. It is possible to
reproduce the sounds separately.
(
-100-
)
3: The original sound was erased
when audio dubbing was
performed.
• If you perform audio dubbing on a
recording done in [16bit] Mode, the
original sound will be erased. If you
wish to preserve the original sound, be
sure to select [12bit] Mode at the time
of recording.
4: Sounds cannot be played back.
• Although a Cassette with no audio
dubbing is being played, is
[12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu
of the [VCR FUNCTIONS] Main-Menu
set to [ST2]? To play back a Cassette
with no audio dubbing, [12bit AUDIO]
must be set to [ST1]. (
-100-
)
• Is the Variable Speed Search Function
working? Press the [
1
] Button to
cancel the Variable Speed Search
Function. (
-95-
)
Card
1: Recorded pictures are not clear.
0
Is [PICTURE QUALITY] on the
[CARD SETUP] Sub-Menu set to
[NORMAL] or [ECONOMY]? If
recording is done with it set to
[NORMAL] or [ECONOMY], images
with fine details may include a
mosaic-like pattern. Set
[PICTURE QUALITY] to [FINE]. (
-104-
)
2: Card Photoshot Playback images
do not look normal.
• The picture may be damaged. In order
to prevent the loss of image data,
backing up on a Cassette or a
personal computer is recommended.
(
-108-
,
-115-
)
3: During Playback the [
k
] Indication
is displayed.
• The image was either recorded in a
different format, or data is damaged.
4: Even if a Card is formatted, it
cannot be used.
• Either the Movie Camera or the Card
may be damaged. Please consult a
dealer.
Others
1: The Free Style Remote Controller
with Mic does not operate correctly.
• If it is not plugged in tightly, it will not
operate correctly.
2: The Movie Camera clatters when
shaking it.
• It is a sound of the lens moving, not a
malfunction.
3: When the USB Cable is
disconnected, an error message
will appear.
• To disconnect the USB cable safely,
double-click the [
] icon in the task
tray and follow the instructions on the
screen. (
-115-
)
VQT0C47.book 134 ページ ２００３年１月２０日 月曜日 午後４時４９分
