Panasonic NR-B32FW2, Service Manual

Page: 45 / 63

45
d. Adjust Door A’ssy PC perpendicularly and horizontally
in the same of Door A’ssy FC.
e. Install and adjust Hinge Top L on the top table, screw
three screws that are fixation of it to use a torque
wrench.
(Torque of screw: 6 ± 2 N·m)
CAUTION
• Fix Hinge Top L securely by three screws for fixaiton.
In case of not enough fixation, it might become cause
of an accident of dropping the Door A'ssy PC.
• Three screws of Hinge Top L are screwed to use a
torque wrench.
4. Install Cover Hinge Top L
a. Connect the connector of Door A'ssy PC, fix the con-
nector into storage part.
CAUTION
• The wire harness is arranged not to touch Hinge Top
L, not to bend it.
b. Open Door A’ssy PC, put Cover Hinge Top L on this
side of the Hinge Top L.
c. Insert hooks (2 portions) of out side to under Hinge
Top L, and hook the hooks of inside. (Do not forcibly
press Cover Hinge Top L. Because it might cause of
damage of hooks.)
d. Screw the screws that are fixation of Cover Hinge Top
L.