Panasonic NR-B32FW2, Service Manual

Page: 16 / 63

16
5.7.2. Operation during Demo Control
1. Photodynamic silver L led control…door open, light ON
Optical vegetable control...general control (door open, light ON; door closed, light flashing)
2. Door operation…During demo control, if any button operation is not performed for 30 seconds, auto demo will be repeated.
If any button operation is performed, the same item as that of door operation is displayed.
During demo control, self-diagnosis is not displayed.
3. Load operation…Compressor stops
Defrosting heater stops
SC heater stops
Damper stops
4. Others
Temperature display…freezing chamber [-20], chilling chamber [4], temperature variable chamber [2]
Temperature rise alarm…none
Rotation speed display …6 pieces fixed
In case of power failure reset…demo mode will be stored and continued
5.7.3. Auto Demo Panel Display
After entering demo control, LEDs of display panel turn on or flash as shown in the following figure. (Auto demo)
In auto demo, operate SW to change to operation demo. In operation demo, return to auto demo if SW is not operated for 30 sec-
onds.