Panasonic NCP500 Operating Manual Download Page 75

Page: 75 / 218

To switch on the relay

Off-hook.

Enter

relay number

(2 digits).

relay no.

PT/SLT/PS

C.Tone

Enter

On-hook.

•

The relay will be switched off after a specified time period.

1.3.28 External Sensor

Preprogrammed extensions can receive an alert call from an external sensor (e.g., security alarm) connected
to the PBX.

To answer a sensor call

Off-hook.

PT/SLT/PS

On-hook.

D.Tone

•

If you do not answer a sensor call within a specified time period, the sensor call will stop.

1.3.29 FWD (Call Forwarding)

–

FWD (Call Forwarding)

–

FWD/DND Settings Using Fixed FWD/DND Button

Document Version 2009-11

Operating Manual

1.3.29 FWD (Call Forwarding)

Summary of Contents for NCP500



























































































































































































































Search results

Summary of Contents for NCP500

Reviews:

Related manuals for NCP500

Brands by name

Popular brands

Panasonic NCP500, Operating Manual

Search results

Summary of Contents for NCP500

Reviews:

Related manuals for NCP500

Brands by name

Popular brands