Panasonic NCP500 Operating Manual Download Page 146

Page: 146 / 218

To clear the log information

Press

TRANSFER

Display PT

While viewing the log information

TRANSFER

Press

Call Log

, or

Down

until

desired party

appears.

(Call Log)

To call

Off-hook.

While viewing the log information

Display PT

Press

Call Log

, or

Down

until

desired party

appears.

(Call Log)

•

The Call Log button light shows the current status as follows:

Off:

No incoming call, or you have already viewed the call log.

Red on:

You have missed calls to view.

•

If your call is answered by another extension, the caller’s information is recorded in the logs
of both your extension and the answering extension.

•

You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2 Personal
Programming".

•

You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).

•

If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.

•

PS user: Refer to "Operating Instructions" for the PS.

•

KX-NT400 user: Refer to "Operating Instructions" for the KX-NT400.

•

Caller information received with a call waiting tone from the telephone company will not be
logged in the call log.

Customizing Your Phone

•

3.1.4 Customizing the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.

1.4.2 Call Log, Outgoing

You can redial using the outgoing call log.

146

Operating Manual

Document Version 2009-11

1.4.2 Call Log, Outgoing

Summary of Contents for NCP500



























































































































































































































Search results

Summary of Contents for NCP500

Reviews:

Related manuals for NCP500

Brands by name

Popular brands

Panasonic NCP500, Operating Manual

Search results

Summary of Contents for NCP500

Reviews:

Related manuals for NCP500

Brands by name

Popular brands