11
Boiling
water
Pouring
out
How to Use
When the unit is not in use
Starts boiling
automatically.
Notifies when boiled.
Fall in temperature
(
)
Automatically switches
to 90 warm keeping
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the
mark.
Lid release part
Operation panel
Cautions
●
Do not pour out water too swiftly.
If splash water over lid release part or
operation panel, it may cause a malfunction.
●
Do not leave water standing in the container.
(It may cause the container to corrode or smell.)
Cleaning
Cleaning
Cleaning
Cleaning
Cleaning
Cleaning
Connect the power plug after fill the water and close the lid. (
1
→
2
)
peep peep
peep peep
Light on
Start of battery charging for cordless
dispensing (sign for battery charging)
Light off
Light on
(Displayed temperature is indicative)
When change the setting of warm keep temperature
(
☞
P. 13)
When adjust the temperature suitable for tea
(
☞
P. 13)
Press
Pour
pressing
Dispensing volume of hot water varies depending
on degree of pressing and dispensing time.
Light on
Automatically locked in 10 seconds after
dispensing is finished.
When dispensing while cord is
removed. (Cordless dispensing)
Guideline for dispensing volume
Battery charge
volume
Dispensing volume
Approx. 3L or more (4.0L type)
Almost full volume (3.0L types)
w
1
1.5L or less
Dispensing period (Amount of time press continuously)
Less than 5 seconds From 5 to 12 seconds More than 12 seconds
Press slightly
Press strongly
*
Be careful for rebound of hot water when press strongly
When cordless dispensing
Only
*
1
Full water volume may not be indicated if frequently
dispensed.
●
Indication lights off and cannot dispense hot water
after 8-10 hours even not dispensed.
Water temperature falls about 90°C in 3 hours after boiling. (3.0L type) at room temperature 20°C
*
Temperature falls quicker if water volume is smaller.
NC-HU401_301-EN+CH-1.indd 11
6/18/08 2:56:36 PM
