40
Connecting the Hoses
Connect the hoses properly to prevent water leaks.
■
Maximum connection distance of hoses and mains lead
Right side connections
Drain hole
Sink
95 cm
145 cm
Left side connections
Rise of drain hose
(max. 100 cm)
Water supply hose
Drain hose
85 cm
Drain hole
Sink
Rise of drain hose
(max. 100 cm)
Water supply hose
Drain hose
95 cm
140 cm
40 cm
41
7
In
st
al
la
tio
n
Se
rv
ic
e
pe
rs
on
o
nl
y
■
Mains water pressure and water flow
●
Water pressure: 0.03-1.0 MPa
If the water pressure exceeds this
value, fit a pressure reducing valve.
●
Water flow from tap: 5 L/min. or
more
■
Connecting the water supply hose
1
Attach one end of the hose to the
water inlet on the appliance and
tighten by hand.
2
Attach the other end of the hose to
the tap and tighten by hand.
3
Turn on the tap slowly and make
sure there are no leaks.
■
Draining to a sink or wash basin
■
Draining to a stand pipe
■
Draining to a drain hole
NOTE
●
Do not twist, pull out or bend the
drain hose.
●
Do not put the hose tip under water.
Water supply hose
CAUTION
●
Do NOT twist, squash, modify or
cut the hose.
●
Tighten the nut firmly.
Water supply hose
Water inlet
(Rear of appliance)
Standard hose
Hose with water
supply valve
3/4"
min.
10 mm
Drain hose
CAUTION
Secure the drain hose with an
elbow so that it does not come off
by water pressure during drainage.
Elbow
(supplied)
Stand pipe
