Panasonic NA-107VC4 Operating Instructions & Installation Instructions Download Page 33

Page: 33 / 40

Installation Instructions - 33

Moving and Installing

Installing the anchor bolts

Remove the four cover caps.

Insert the anchor bolts into each

anchor bolt hole.

Tighten each bolt with the spanner.

Levelling the appliance

On each leg, loosen the plastic nut by

turning it clockwise.
Adjust each foot by turning it

clockwise or anticlockwise.
Use a spirit level to make sure that

the appliance is properly levelled.
Tighten each plastic nut by turning it

anticlockwise.

Caution

Make sure that all plastic nuts are

tightened securely and the feet are

still bolted to the appliance.

If they are unbolted, the appliance

will move around.

Do NOT put cardboard, wood

or similar materials under the

appliance to compensate for

unevenness.
Be careful not to destabilize the

appliance when cleaning the floor.

Plastic nut

Foot

NA-107VC4_EU.indb 33

2012-2-1 9:56:40

Summary of Contents for NA-107VC4









































Search results

Summary of Contents for NA-107VC4

Reviews:

Related manuals for NA-107VC4

Brands by name

Popular brands

Panasonic NA-107VC4, Operating Instructions & Installation Instructions

Search results

Summary of Contents for NA-107VC4

Reviews:

Related manuals for NA-107VC4

Brands by name

Popular brands