Installation Instructions - 35
Connecting Hoses and Power Supply
Leak-proof System
The appliance is installed with the
system that is designed to prevent water
leaks. The system includes the following
components.
1) Aquastop system
If a water leak is detected in the water
inlet hose, the system stops supplying
water automatically. This system is only
functions with hoses with water supply
valves.
2) Overflow detection
If water in the appliance increases to
a certain level, this function stops the
water supply and activates the drain
pump.
Water-drain hose
Caution
Do NOT twist, pull out, or bend the
-
drain hose.
Do NOT use joints to extend the
-
water-drain hose.
Draining to a sink or wash-basin
Caution
The water-drain hose must be
-
removed from the hook on the
rear side of the appliance before
the appliance is operated.
If the water-drain hose is close to
the appliance, the hose may come
in contact with the appliance and
generate noise during the spin cycle
because of vibrations.
Secure the water-drain hose so
-
that it will not come out of the
basin.
Do NOT block the basin, where
-
the drain outlet is. Make sure
that drainage into the drain is
sufficient.
Do NOT let the tip of the
-
water- drain hose dip into the
drained water.
This can cause water to flow back
into the appliance.
Draining to a drain hose
Elbow
NA-107VC4_EU.indb 35
2012-2-1 9:56:41
