3 Wiring
U, V, W
U
V
W
MFMCA0xxxWJD ACS **/YY
Wiring of the XB connector for the motor power supply
X6 connector (encoder connector)
Connect the encoder cable to the X6 connector.
MFECA0xxxWJD ACS **/YY
Wiring of the X6 connector for the encoder connection
X2 connector (serial communication interface)
Connect the serial communication cable DV0PM20024CAB to the X2 connector and to COM
port 0 (RS232C interface) of the FP0H PLC.
Connector X2 for serial communication cable
X1 connector (USB connector for PC connection)
The servo driver is configured using the PC configuration software PANATERM. Use a
commercially available USB A to mini-B cable to connect the PC to the servo driver.
8
QS2002_V1.0_EN
