Panasonic MCV5706 - UPRIGHT VACUUM, Operating Instructions Manual

Page: 34 / 44

- 11 -
Power Tools on Board Cord Hook Cord Length Motor Protector
120V AC(60Hz)
Yes Yes 20 Ft. (6,1 m) Yes
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
- 34 -
Voltaje Herramientas Sujetador Extensión Protector
incluídas del cordón de cordón de motor
120 V AC(60 Hz)
Si Si 6,1 m (20 pi) Si
Alimentation Accessoires Crochet de Cordon Protecteur
rangement d’alimentation du moteur
du cordon
120 V AC(60 Hz)
Oui Oui 6,1 m (20 pi) Oui
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢
Unplug vacuum.
➢ ➢
Press two tabs and pull open suction
inlet and check for clogging.
➢ ➢
Disconnect hose from short hose and
check the hose for clogging.
➢ ➢
Plug in vacuum cleaner and turn on.
➢ ➢
Stretch hose in and out to remove
clog.
➢ ➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢
Remove lower plate.
➢ ➢
Remove short hose from nozzle by
lifting straight up.
➢ ➢
Inspect hose end and clear any
obstructions.
➢ ➢
Reinstall short hose.
➢ ➢
Reinstall lower plate.
Motor
Protector
Protecteur
du moteur
Protector
de motor
Short Hose
Tuyau court
Manguera
corta
Suction
Inlet
Couvercle
(entrée
d’aspiration)
Abertura de
aspiración
Hose
Tuyau
Manguera
Tabs
Lengüetas
Languettes
Removing Clogs
+
Short Hose
Tuyau court
Manguera
corta