background image

- 23 -

DISPOSAL INFORMATION

Disposing the appliance

Before disposing the appliance, remove the dust bag and all filters, and dispose them with normal household waste.

Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)

This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste. 
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product. 
Disposing of this product correctly will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling. Please contact your local authority for further details of your nearest
designated collection point. 
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation. 

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.

Disposing Packaging

Make sure that any package, for example, plastic bags, are kept out of reach of children to avoid risk of suffocation.

The packaging used to protect the appliance from damage during transportation is all recyclable.  For information on
recycling, contact your local authority.

Disposing filters

Filters can be disposed of in normal household waste.

Summary of Contents for MCU-L424





























Reviews: