Panasonic MCU-L424, Operating Instruction

Page: 8 / 28

- 8 -
C) HANDLE RELEASE
MC-UL424:
Release the handle by
placing foot on the nozzle
and pulling back and down
on the handle with your
hand.
MC-UL426:
Release the handle by
pressing down on the body
release pedal with your foot
and pulling back and down
on the handle with your
hand.
Your vacuum cleaner is equipped with three (3) position
handle release;
• Upright position (locked)
• Middle position (normal use)
• Low position (under furniture)
CAUTION
To prevent damaging carpeted floors, tiled floors,
linoleum, etc. Do not leave the beater bar rotating in
the same place for too long.
NOTE: After use, unplug the mains lead from the socket and
store the vacuum cleaner in the upright (vertical) position.
Move vacuum cleaner to
middle position for normal
use.
Move vacuum cleaner to low position for
cleaning under furniture.
Move vacuum cleaner to
upright position for storage
and tool use.
UPRIGHT POSITION
1 1 1 3
MC-UL426 ONLY:
1 2
MIDDLE POSITION (NORMAL USE)
MC-UL424:
Release the handle by
placing foot on the nozzle
and pulling back and down
on the handle with your
hand.
MC-UL426:
Release the handle by pressing down
on the body release pedal with your foot
and pulling back and down on the
handle with your hand.
1 5
LOW POSITION (UNDER FURNITURE USE)
1 4
This model is fitted with an auto beater bar stop.
While operating the vacuum cleaner in the
CARPET position, the beater bar will
automatically stop rotating when vacuum cleaner
is in the upright (locked) position for storage or
tool use.
1 6
Beater Bar: AUTO OFF Beater Bar: AUTO ON