Panasonic MCU-L424, Operating Instruction

Page: 5 / 28

A) HANDLE AND HOSE ASSEMBLY
Handle
Handle Screw
Remove the handle screw from the rear of the handle.
Insert the handle in the handle opening as shown in the
illustration.
Using screwdriver, tighten handle screw.
NOTE: It may be necessary to adjust the handle
slightly to align the screw hole.
1 3
1 2
ASSEMBLY INSTRUCTIONS
Hose
Nozzle
Hose
1 1
Remove the hose from the nozzle hose and carrying
handle.
Alternate assembly:
Reinstall hose onto nozzle hose. Route hose as shown.
Hose
Nozzle
Hose
1 4
To use the QuickDraw feature, the QuickDraw wand can
be installed and stored on-board the vacuum cleaner.
Insert the tab on the wand into the “J” slot on the hose.
Twist the wand to lock in place.
Place the wand into the wand holder and press firmly
onto nozzle hose.
Route hose in the hose holders as shown.
Nozzle
Hose
Wand
Holder
Hose
Holder
Hose
Holder
1 5
“J” Slot
QuickDraw
Wand
Hose
Handle
Raised
Tab
- 5 -