9
[Before Using the Products]
Before Using
the Products
Failure to observe this in-
struction could result in fire.
Do not place the console close to
a heating unit such as a heater or
a large wire wound resistor.
Do not place combustibles near
by the motor, driver and regenera-
tive resistor.
Failure to observe this in-
struction could result in fire
and breakdowns.
Ground the earth terminal of the
motor and driver without fail.
Failure to observe this in-
struction could result in
electrical shocks.
Install an overcurrent protection,
earth leakage breaker, over-tem-
perature protection and emergen-
cy stop apparatus without fail.
Failure to observe this instruc-
tion could result in electrical
shocks, injuries and fire.
Install an emergency stop circuit
externally so that you can stop
the operation and shut off the
power immediately.
Failure to observe this instruction could
result in injuries, electrical shocks, fire,
breakdowns and damages.
Install and mount the Product and
machinery securely to prevent
any possible fire or accidents in-
curred by earthquake.
Failure to observe this instruc-
tion could result in electrical
shocks, injuries and fire.
Mount the motor, driver and re-
generative resistor on incombust-
ible material such as metal.
Failure to observe this in-
struction could result in fire.
Check and confirm the safety of
the operation after the earthquake.
Failure to observe this instruc-
tion could result in electrical
shocks, injuries and fire.
Make the correct phase sequence
of the motor and correct wiring of
the encoder.
Failure to observe this instruction
could result in injuries breakdowns
and damages.
Turn off the power and wait for a
longer time than the specified
time, before transporting, wiring
and inspecting the driver.
Failure to observe this in-
struction could result in
electrical shocks.
Turn off the power and make it
sure that there is no risk of elec-
trical shocks before transporting,
wiring and inspecting the motor.
Failure to observe this in-
struction could result in
electrical shocks.
Wiring has to be carried out by the
qualified and authorized specialist.
Failure to observe this in-
struction could result in
electrical shocks.
DANGER
