Panasonic LUMIX DMC-ZS100 Owner'S Manual Download

Page: 270 / 406

270

SQW0547

Playing Back and Editing Pictures

Viewing motion pictures

This unit was designed to play motion pictures using the AVCHD and MP4 formats.

•Motion pictures are displayed with the motion picture icon ([ ]).

•4K burst files recorded with the 4K Photo function are displayed with [

To select and save a picture from 4K burst files, refer to

(→

190)

•The [Post Focus] icon ([

]) is shown on images recorded using [Post Focus]. To

save pictures with a selected focus point, refer to

(→

214)

Press to start playback

•Touching [

] in the middle of the screen allows you

to play back motion pictures.

•Motion pictures recorded with [Snap Movie] are played

back automatically.

•Some information will not be displayed for motion

pictures recorded in [AVCHD].

Motion picture recording time

■

Operations during motion picture playback

Operation

Touch operation

Description

Play/pause
Fast rewind

Single-frame rewind

(while paused)

Stop
Fast forward

Single-frame forward (while paused)

ZS100

Volume down / Volume up

ZS60

The fast forward or rewind speed increases if you press again.

Motion pictures recorded in [AVCHD] are rewound frame by frame approximately every

0.5 seconds.

•Control panel disappears when no operation is performed for some time. Touch the

screen to redisplay the control panel.

•If you press [MENU/SET] during a pause, you can create a picture from a motion picture.

(→

271)

Summary of Contents for LUMIX DMC-ZS100























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands

Panasonic LUMIX DMC-ZS100, Owner'S Manual

Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Related manuals for LUMIX DMC-ZS100

Brands by name

Popular brands