Panasonic Lumix DMC-LX100EBS, Owner'S Manual For Advanced Features

Page: 311 / 332

311
SQW0021
Others
Q&A Troubleshooting
■
Recording
Cannot record pictures.
•Card is full.
→ Free space by deleting unwanted pictures (→73) .
•When a large capacity card is used, you may not be able to take a picture for a while after you turn
on the camera.
•Focus is not aligned.
→ When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper
focusing is achieved. (→125)
Recorded pictures look white.
•Lens is dirty (fingerprints, etc.).
→ Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth.
•Lens is foggy (→12) .
Recorded pictures are too bright/too dark.
•Adjust the exposure (→135) .
•AE Lock (→133) is set inappropriately.
Zooming stops instantaneously.
•When using the Extended optical zoom, the zooming action will stop temporarily. This is not a
malfunction.
Some pictures are taken when I press the shutter button just once.
•Camera is set to use [Auto Bracket], White Balance Bracket, [Aspect Bracket], or [Burst]. Self-
Timer is set to [ ].
→ Clear the setting. (→106, 141)
Unable to perform bracket recording.
•The remaining memory space in the card is low.
→ Check the remaining memory space in the card.
Focus not aligned correctly.
•Subject outside of focus range. (→126)
•Caused by jitter or subject movement. (→168)
•[Focus/Release Priority] is set to [RELEASE]. (→125)
•[Shutter AF] is set to [OFF]. (→124)
•AF Lock (→133) is set inappropriately.
Recorded pictures are blurred. The stabilizer function ineffective.
•Shutter speed is slower in dark locations and the stabilizer function is less effective.
→ Hold camera firmly with both hands, keeping arms close to body.
•Use a tripod and the self-timer when using a slower shutter speed (→148) .