Panasonic Lumix DMC-LX100EBS, Owner'S Manual For Advanced Features

Page: 142 / 332

142
SQW0021
Shutter and Drive Settings
Burst function
Recording mode:
The pictures are recorded in succession while the shutter button is pressed.
•Pictures that are taken while the [Burst Rate] is set to [SH] are recorded together as a
single burst group (→201) .
1
Press [ ] button ( )
2
Press to select the burst icon ([ ],
etc.) and press
3
Press to select the burst speed and
press [MENU/SET]
[SH]
(Super high
speed)
*
1
[H]
(High speed)
[M]
(Middle
speed)
[L]
(Low speed)
Speed
(pictures/
sec.)
[AFS] 40 11 7 2
[AFF] / [AFC] ― 6.5 6.5 2
Live View during burst
recording
None None Available Available
No. of
pictures
*
2
With RAW files ― 20
*
3 20
*
3 20
*
3
Without RAW
files
60
Depends on the capacity of the card
*
3
*
1 The electronic shutter will be activated.
*
2 The number of burst pictures is limited by the picture-taking conditions and the type and/or
status of the card used.
*
3 Pictures can be taken until the card becomes full. However, the burst speed will become
slower halfway through the recording. The exact time when the slower burst speed will start
depends on the settings of the aspect ratio, picture size, and quality as well as the type of
card used.
•The burst speed may become slower depending on the following settings:
– [Picture Size] (→108) , [Quality] (→109) , Sensitivity (→136) , Focus mode
(→114) , [Focus/Release Priority] (→125)
•Burst speed can also be set with [Burst Rate] in the [Rec] menu.
•For information about RAW files, refer to (→109) .