173
5. Focus and Brightness (Exposure) Settings
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
• You can switch the functions between the rear dial and the front dial by pressing [DISP.].
• The Exposure Compensation value can be set within a range of
j
5 EV to
i
5 EV.
When recording motion pictures, the Exposure Compensation value can be set within a
range of
j
3 EV to
i
3 EV.
When recording 4K photos, the Exposure Compensation value can be set within a
range of
j
3 EV to
i
3 EV.
• Select [0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
• This operation is possible only when [Firing Mode]
in [Flash] is set to [TTL].
• Flash output can also be adjusted using [Flash Adjust.] in [Flash] in the [Rec] Menu.
The [
]/[Fn1] button can be used in two ways, as [
] (exposure compensation) or
[Fn1] (function 1). At the time of purchase, the button is set to [
].
• For details on the function buttons, refer to
.
1
Press [
].
2
Rotate the rear dial to compensate the
exposure.
A
Exposure Compensation value
B
Flash Adjust
Underexposed
Properly exposed
Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
Fn1
+1
+1 +2
+2 +3
+3 +4
+4 +5
+5
-5
-5 -4
-4 -3
-3 -2
-2 -1
-1 00
0 0 0
+5
+5
+5
+1
+1
0
B
A
