Recording pictures (advanced)
53
Recording pictures (advanced)
Using the Mode Dial
When you want the background to be in
sharp focus, set the aperture value to a
higher number. The higher the aperture
value is the smaller the aperture opening
will be. For a soft focus background, set the
aperture value to a lower number which
corresponds to a larger aperture opening.
1
Set the aperture value and take
the picture.
• Refer to P57 for the available range of the
aperture value and the shutter speed.
• The focus range is 5 cm –
¶
(Wide),
120 cm –
¶
(Tele).
• If the subject is too bright, set to larger
aperture value, if too dim, set to smaller
aperture value.
• The brightness of the screen may differ
from that of the actual pictures. Check it
using review function or setting to the
playback mode.
• The ISO sensitivity cannot be set to
[AUTO]. (P70) (When the recording mode
is switched to Aperture-priority AE, the
ISO sensitivity is automatically set to
[ISO100] even though it was set to [AUTO]
beforehand.)
• When the exposure is not adequate, the
aperture value and the shutter speed on
the screen turn red.
Aperture-priority AE
F2.8
EXPOSURE
ISO
100
19
2016
FZ3-EB.book 53 ページ 2004年7月9日 金曜日 午後6時24分
Summary of Contents for LUMIX DMC-FZ3EB
Page 114: ...114 MEMO ...
Page 115: ...115 MEMO ...