Preparation
16
Inserting/Removing the Card
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1
Slide the card/battery door to
open it.
• The card and the data may be
damaged if it is inserted or removed
while the camera is on.
• We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
2
Insert:
Insert the card with the label
facing the front of the camera
until it clicks.
Remove:
Push the card until it clicks, then
pull the card out upright.
• Check the direction of the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3
1
Close the card/battery door.
2
Slide the card/battery door to
the end and then close it firmly.
• If the card/battery door cannot be
completely closed, remove the card and
insert it again.
FZ3-EB.book 16 ページ ２００４年７月９日 金曜日 午後６時２４分
Summary of Contents for LUMIX DMC-FZ3EB
Page 114: ...114 MEMO ...
Page 115: ...115 MEMO ...
