Panasonic Lumix DMC-FZ200 Page 195 Operating Instructions For Advanced Features Download | Manualshive

Page: 195 / 220

background image

- 195 -

Others

Note

• Lens adaptor (optional) is needed to use the conversion lens.

• MC protector (DMW-LMC52: optional) or ND filters (DMW-LND52: optional) cannot be used together

with the conversion lens. Remove them before attaching the conversion lens.

• Do not use with anything other than DMW-LC55 or DMW-LT55.

• When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may be

affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.

• When using the tele conversion lens:

– We recommend using a tripod.
– The Stabiliser function may not work sufficiently.
– The focus indication may light due to the jitter even if the subject is not focused.
– The time required for focusing may become longer than usual.

The MC protector (DMW-LMC52: optional) is a transparent filter which affects neither the
colours nor the amount of light, so it can always be used to protect the camera’s lens.
The ND filter (DMW-LND52: optional) reduces the amount of light to approximately 1/8th (equal
to adjusting the aperture value 3 increments) without affecting the colour balance.
PL filter (DMW-LPL52: optional) will suppress the reflected light from a metal or non spherical
surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it
possible to take a picture with enhanced contrast.

Note

• Do not attach multiple filters at the same time.
• If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
• If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera.
• Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus may

be adjusted to the lens, resulting in the subject being out of focus.

• Refer to the operating instructions for each filter for details.

(DMC-FZ200)

: DMW-LA7

(DMC-FZ60)

:

DMW-LA5

Protector/Filter (optional)

«
...
193
194
195
196
197
...
»

Summary of Contents for Lumix DMC-FZ200





























































































































































































































Reviews:

No comments

Related manuals for Lumix DMC-FZ200

Brand: Olympus Pages: 43

Brand: Z3 Technology Pages: 5

Brand: Zenith Pages: 27

Brand: Zonet Pages: 58

Brand: Palsonic Pages: 1

Brand: Canon Pages: 3

Brand: Olympus Pages: 116

SMART CAMERA PIR BATTERY

Brand: Tesla Pages: 6

Brand: Vivitar Pages: 51

Brand: Uniden Pages: 6

Brand: Wonwoo Pages: 19

Brand: 70mai Pages: 6

Brand: XtendLan Pages: 34

Brand: Conbrov Pages: 10

Brand: Easylife Pages: 4

Brand: Bresser Pages: 28

Brand: Starlight Xpress Pages: 12

Brand: AXIOMTEK Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands