Panasonic Lumix DMC-FZ200 Page 214 Operating Instructions For Advanced Features Download

Page: 214 / 220

- 214 -

Others

• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect

the pictures you are recording.

• Is the flash closed?

Open the flash.

(P75)

• The flash cannot be used in the following cases:

– When using Auto Bracket

(P146)

– When recording in [Burst] (except for [

])

(P80)

– [Scenery]/[Panorama Shot]/[Night Scenery]/[Handheld Night Shot]/[HDR]/[Sunset]/[Glass

Through]/[3D Photo Mode] (Scene Mode)

(P107)

• The flash is activated twice when Red-Eye Reduction

(P76)

has been set.

• Is Burst Mode set to [

• [Rotate Disp.]

(P67)

is set to [

] or [

• Is there a picture on the built-in memory or the card?

The pictures on the built-in memory appear when a card is not inserted. The picture data on the
card appears when a card is inserted.

• Is this a folder or picture which was processed in the PC? If it is, it cannot be played back by this unit.

It is recommended to use the “PHOTOfunSTUDIO” software in the CD-ROM (supplied) to write
pictures from PC to card.

• Has [Filtering Play] been set for playback?

Change to [Normal Play].

(P156)

Noise appears on the LCD monitor.

Flash

The flash is not activated.

The flash is activated multiple times.

Playback

The picture being played back is rotated and displayed in an unexpected direction.

The picture is not played back.
There are no recorded pictures.

Summary of Contents for Lumix DMC-FZ200





























































































































































































































Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands

Panasonic Lumix DMC-FZ200, Operating Instructions For Advanced Features

Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands