Panasonic Lumix DMC-FZ200 Page 61 Operating Instructions For Advanced Features Download

Page: 61 / 220

- 61 -

Basic

• Set to [ON] to display the [Expo.Meter] when correcting exposure,

performing Programme Shift, setting aperture, and setting shutter speed.

• Unsuitable areas of the range are displayed in red.
• When [Expo.Meter] is not displayed, switch the display information for

screen by pressing [DISP.].

(P69)

• The [Expo.Meter] disappears after approximately 4 seconds if no operation is performed.

[Remaining Disp.]

This will switch display between the number of recordable pictures and
available recording time.

([Remaining Shots]):

This will display the number of recordable pictures for still pictures.

([Remaining Time]):

This will display the available recording time for motion pictures.

[Highlight]

When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
This does not affect the recorded image.

[ON]/[OFF]

• If there are any white saturated areas, we recommend

compensating the exposure towards negative

(P79)

referring to the histogram and then taking the picture
again. It may result in a better quality picture.

• There may be white saturated areas if the distance

between the camera and the subject is too close when
taking pictures with the flash.

• Highlighting does not work during Multi Playback,

Calendar Search, Playback Zoom, or Motion Picture
Playback.

[ON]

[OFF]

[Expo.Meter]

Set whether or not to display the exposure meter.

[ON]/[OFF]

125

4.0

2.8

5.6

8.0

4.0

-3

Summary of Contents for Lumix DMC-FZ200





























































































































































































































Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands

Panasonic Lumix DMC-FZ200, Operating Instructions For Advanced Features

Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands