Panasonic LUMIX DMC-FZ18 Operating Instructions Manual Download Page 60

Page: 60 / 173

Advanced (Recording pictures)

- 60 -

Taking Pictures using
Burst Mode

Press and hold the single or burst
mode button until
[BURST SHOOTING] appears.

Press

to select a mode.

• You can also press the single or burst

mode button to select.

Press [MENU/SET].

• You can also press the shutter button

halfway or press the centre of the
joystick to finish.

• The menu screen disappears after about

5 seconds. At this time, the selected item
is automatically set.

Take a picture.

• Hold down the shutter button fully to

activate the burst mode.

∫

Number of pictures recorded in burst
mode

The burst speed is constant regardless of
the transfer speed of the card.

• The number of pictures indicated is when

the shutter speed is faster than 1/60 and the
flash is not activated.

• The burst speed (pictures/second) may

become slower depending on the recording
environment such as in dark places, if the
ISO sensitivity is high etc.

• If you take pictures in burst mode with the

built-in memory, it will take time to write the
picture data.

Burst speed

(pictures/

second)

Number of recordable pic-

tures (pictures)

max. 4

max. 7

approx. 2

Depends on the
remaining capacity of the
built-in memory/card.

Summary of Contents for LUMIX DMC-FZ18














































































































































































Search results

Summary of Contents for LUMIX DMC-FZ18

Reviews:

Panasonic LUMIX DMC-FZ18, Operating Instructions Manual, Page: 60 / 173

Search results

Summary of Contents for LUMIX DMC-FZ18

Reviews: