- 53 -
Advanced (Recording pictures)
• When the flash is used at the ISO sensitivity
[AUTO] setting, the ISO sensitivity is
increased automatically to the maximum
[ISO400] level.
∫
Shutter speed for each flash setting
¢
[PARTY]
(P77)
in scene mode
• Refer to
P66
for the Aperture-priority AE,
Shutter-priority AE or Manual exposure
mode.
• There will be differences in the above shutter
speeds in the following advanced scene
mode or scene modes.
– [NIGHT SCENERY]:
8 seconds to 1/2000th of a second
– [STARRY SKY]:
15 seconds, 30 seconds, 60 seconds
– [FIREWORKS]:
1/4th of a second, 2 seconds
• In intelligent auto mode [
], shutter speed
changes depending on the identified scene.
∫
Adjusting flash output
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1
Press
3
[
] several times until
[FLASH] appears and then press
2
/
1
to set the flash output.
• Select [0] to return to the original flash
output.
2
Press [MENU/SET] to finish.
• You can adjust from [
j
2 EV] to [
i
2 EV] in
steps of [1/3 EV].
• When the flash output is adjusted, the flash
output value appears on the upper left of the
screen.
• The flash output setting is memorised even if
the camera is turned off.
• The flash output cannot be adjusted in the
following cases:
– In intelligent auto mode [
]
– In motion picture mode [
]
– In [SCENERY] mode
– In [NIGHT SCENERY], [ILLUMINATIONS]
or [CREATIVE NIGHT SCENERY] in
[NIGHT PORTRAIT] mode
– In [SUNSET], [STARRY SKY],
[FIREWORKS] or [AERIAL PHOTO] in
scene mode
Flash setting
Shutter speed
(Sec.)
:
AUTO
1/30 to 1/2000
:
AUTO/
Red-eye
reduction
1/30 to 1/2000
:
:
Forced ON
Forced ON/
Red-eye
reduction
:
Slow sync./
Red-eye
reduction
1 to 1/2000
1/8 to 1/2000
¢
:
Forced OFF
1 to 1/2000
(In programme
AE mode)