Panasonic LUMIX DMC-FZ18 Operating Instructions Manual Download Page 52 | Manualshive

Page: 52 / 173

Panasonic LUMIX DMC-FZ18 Operating Instructions Manual Download Page 52

Advanced (Recording pictures)

- 52 -

¢

When AUTO [

] is selected, AUTO

[

], AUTO/Red-eye reduction

[

] or Slow sync./Red-eye reduction

[

] is set depending on the type of

subject and brightness.

• The flash setting may change if the

recording mode is changed. Set the flash
setting again if necessary.

• The flash setting is memorised even if the

camera is turned off. However, the advanced
scene mode or the scene mode flash setting
is reset to the initial setting when the
advanced scene mode or the scene mode is
changed.

∫

The available flash range to take
pictures

• The available flash range is an

approximation.

• In [HIGH SENS.]

(P79)

in scene mode, the

ISO sensitivity automatically switches to
between [ISO1600] and [ISO6400] and the
available flash range also differs.
Wide: Approx. 1.15 m to approx. 24.2 m
Tele: Approx. 1 m to approx. 16.1 m

• The available focus range differs depending

on the recording mode.

(P171)

• When the flash is used at the intelligent ISO

(P96)

setting, the ISO sensitivity is increased

automatically to maximum ISO sensitivity
level.

¥

—

±

—

—

±

—

—

—

—

—

¥

—

—

—

—

—

¥

—

—

¥

—

—

±

¥

—

±

—

—

±

—

—

—

—

—

¥

ISO sensitivity

Available flash range

[AUTO]

Wide

30 cm to 6.0 m

Tele

1.0 m to 4.0 m

[ISO100]

Wide

30 cm to 3.0 m

Tele

1.0 m to 2.0 m

[ISO200]

Wide

40 cm to 4.2 m

Tele

1.0 m to 2.8 m

[ISO400]

Wide

60 cm to 6.0 m

Tele

1.0 m to 4.0 m

[ISO800]

Wide

80 cm to 8.5 m

Tele

1.0 m to 5.7 m

[ISO1250]

Wide

1.0 m to 10.7 m

Tele

1.0 m to 7.1 m

[ISO1600]

Wide

1.15 m to 12.1 m

Tele

1.0 m to 8.0 m

«
...
50
51
52
53
54
...
»

Summary of Contents for LUMIX DMC-FZ18














































































































































































Reviews:

No comments