Panasonic LUMIX DMC-FZ18 Operating Instructions Manual Download Page 160

Page: 160 / 173

Others

- 160 -

Troubleshooting

If you return the menu settings to the initial
settings at the time of purchase, the condition
may improve.

Select [RESET] in the [SETUP] menu.

(P27)

∫

Battery and power source

1: The camera cannot be operated even

when it is turned on.

• Is the battery inserted correctly?

– Check the direction of the battery.

(P17)

• Is the battery sufficiently charged?

– Use a battery that has been sufficiently

charged.

2: The LCD monitor turns off while the

camera is turned on.

• Does the picture appear on the

Viewfinder?
– Press [EVF/LCD] to switch to LCD

monitor display.

• Is power save mode

(P25)

activated?

– Press the shutter button halfway to

cancel these modes.

• Is the battery exhausted?

– Use a battery that has been sufficiently

charged.

3: The camera turns off immediately after

it is turned on.

• Is the battery charge insufficient to

operate the camera?
– Use a battery that has been sufficiently

charged.

– If you leave the camera on, the battery

will be exhausted. Turn the camera off
frequently by using power save mode

(P25)

etc.

∫

Recording

1: The picture cannot be recorded.

• Is the mode dial correctly set?
• Is there any memory remaining on the

built-in memory or the card?
– Before recording, delete some pictures.

(P42)

2: The recorded picture is whitish.

The lens is dirty

• The picture can become whitish if there is

dirt e.g. fingerprints on the lens. If the lens
is dirty, turn the camera off, retract the
lens barrel

(P9)

and gently wipe the lens

surface with a soft dry cloth.

3: The recorded picture is too bright or

dark.

• Check that the exposure is correctly

compensated.

(P57)

4: 2 or 3 pictures are taken at one time.

• Is auto bracket

(P59)

or burst mode

(P60)

set?

• Is the self-timer set to [10S/3PICTURES]?

(P55)

5: The subject is not focused properly.

• The focus range varies depending on the

recording mode.
Rotate the mode dial to set the proper
mode for the distance to the subject.

• Is the subject beyond the focus range of

the camera?

(P31, 37, 62)

• Have you taken a picture with jitter?
• Did you take the picture after pressing the

shutter button halfway? The subject is not
focused until the shutter button is pressed
halfway. (However, this excludes
intelligent auto mode [

].)

Summary of Contents for LUMIX DMC-FZ18














































































































































































Search results

Summary of Contents for LUMIX DMC-FZ18

Reviews:

Panasonic LUMIX DMC-FZ18, Operating Instructions Manual, Page: 160 / 173

Search results

Summary of Contents for LUMIX DMC-FZ18

Reviews: