- 49 -
Advanced (Recording pictures)
3
Press [MENU/SET].
A
The [AUTO POWER LCD] icon ([
]
([
])), [POWER LCD] icon ([
])
or
[HIGH ANGLE] icon ([
]) appears.
∫
Cancelling setting
If you press and hold [LCD MODE] again for
1 second the screen shown in step
2
is
displayed. Select [OFF] to cancell a setting.
• High angle mode is also cancelled if you turn
the camera off or power save mode is
activated.
• The brightness of the pictures displayed on
the LCD monitor screen are increased in
Auto power LCD, Power LCD and High angle
modes. Therefore, some subjects may look
different on the LCD monitor. However, this
does not affect the recorded pictures.
• The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
• If the screen is difficult to see because of
light from the sun etc. shining on it, use your
hand or another object to block the light.
• Auto power LCD mode or High angle mode
is not activated in the following cases.
– In playback mode [
]
– In print mode [
]
– While the menu screen is displayed
– While the review screen is displayed
[
]:
[AUTO
POWER LCD]
The Power LCD is
automatically activated in
bright places such as
outdoors etc. When the
Power LCD is activated,
[
] changes to [
].
[
]:
[POWER LCD]
The LCD monitor
becomes brighter and
easier to see even when
taking pictures outdoors.
[
]:
[HIGH
ANGLE]
The LCD monitor is
easier to see when taking
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because
there is a person in the
way. (However it
becomes more difficult to
see when looked at
straight on.)
[OFF]
The LCD monitor returns
to the normal brightness.