Basic
- 48 -
• Calibration is not done if correct position is not touched. Touch the [
i
] mark again.
• If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
• The Stabilizer function is switched between [On] and [Off] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
• [Stabilizer Demo.] is an approximation.
• [Auto Demo] is not output to the television.
[Calibration]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Touch [Start].
2
Touch the orange [
r
] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
• A message is displayed once the
position is set.
3
Touch [End] to finish.
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]
A
Amount of jitter
B
Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
A
B
