- 171 -
Others
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• Check following regarding the wireless access point (broadband router).
>
The wireless access point (broadband router) information set on this unit is wrong. Check
the authentication type, encryption type, and encryption key.
>
Power of the wireless access point (broadband router) is not turned on.
>
Setting of the wireless access point (broadband router) is not supported by this unit.
• Check the network setting of the destination.
[AVCHD video cannot be sent over Wi-Fi. Please use Image Uploader.]
• To transmit a motion picture recorded in [AVCHD], transmit it using the upload tool “LUMIX
Image Uploader”.
[No image to send]
• This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file type of the image to transmit.
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
• Radio waves from the wireless access point (broadband router) are getting weak. Perform the
connection closer to the wireless access point (broadband router).
• There is no reply from the server or it has exceeded the communication processing time. Try
again after a while.
• Depending on the wireless access point (broadband router), connection may be automatically
disconnected after specific time has passed. Reconnect the connection again.
[Login failed. Please check Login ID and Password]
• Login ID or password for the “LUMIX CLUB” is not correct. Please enter it again. If you have
forgotten the login ID or the password, there is information in the login screen of the “LUMIX
CLUB” website.
[Some files cannot be sent because of destination limit]/[Transfer completed.
Some files are left because of destination limit.]
• Check the file format of the image to send.
• Sending motion pictures may fail if the file size is too large. Split the motion picture using
[Unavailable. Please set Login settings on LUMIX CLUB web site.]
• Log into the “LUMIX CLUB” from your smartphone or PC, and set the login details of the
destination WEB service.
[Both picture and video sharing service cannot be selected together]
• WEB services designed only for pictures, and WEB services designed only for motion pictures
cannot be selected at the same time. Deselect one of the services.
[Cannot get IP address. Please set wireless AP’s IP address setting to DHCP.]
• Turn on DHCP settings of the IP address of the connected wireless access points (broadband
router).
[Cannot connect to server]
• If a message is displaying asking to update the route certificate, agree to update the route
certificate.
