Basic
- 26 -
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
When taking pictures
When recording motion pictures
• [
¦
] is set if none of the scenes are applicable, and the standard settings are set.
• When [
], [
] or [
] is selected, the camera automatically detects a person’s face, and it
will adjust the focus and exposure.
(Face Detection)
• If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the Scene Mode has been identified as [
], the shutter speed will be set to a maximum of
8 seconds.Take care not to move the camera while taking pictures.
• When [Face Recog.] is set to [On], and the face similar to the registered face is detected, [R] is
displayed in the top right of [
], [
] and [
].
• Due to factors such as size, contrast, motion and proximity a different mode may be identified
for the same subject.
– Subject conditions: When the face is bright or dark, the size of the subject, the colour of the
subject, the distance to the subject, the contrast of the subject, when the subject is moving
– Recording conditions: Sunset, sunrise, under low brightness conditions, when the camera is
shaken, when zoom is used
• For the best results, it is recommended that you take pictures in the appropriate Recording
Mode.
• The Backlight Compensation
– Backlight refers to when light comes from the back of a subject. In this case, the subject will
become dark, so this function compensates the backlight by brightening the whole of the
picture automatically.
Scene Detection
¦
>
[i-Portrait]
[i-Scenery]
[i-Macro]
[i-Night Portrait]
¢
1
[i-Night Scenery]
[i-Sunset]
[i-Baby]
¢
2
¢
1 Only when [
] is selected.
¢
2 When [Face Recog.] is set to [On], [
] will be displayed for birthdays of
registered faces already set only when the face of a person 3 years old or
younger is detected.
¦
>
[i-Portrait]
[i-Scenery]
[i-Low Light]
[i-Macro]