Panasonic Lumix DMC-FX90EB, Operating Instructions Manual

Page: 172 / 193

Others
- 172 -
Troubleshooting
First, try out the following procedures ( P172 – 183 ).
• The battery is exhausted. Charge the battery.
• If you leave the camera on, the battery will be exhausted.
>
Turn the camera off frequently by using the [Economy] etc. (P44)
• If you connect to a TV compatible with VIERA Link with an HDMI micro cable (optional) and
turn off the power on the TV with the remote control for the TV, the power on this unit also turns
off.
> If you are not using VIERA Link, set [VIERA Link] to [Off]. (P46)
• Insert the battery securely all the way in. (P12)
• Is the mode set to [Rec] Mode?
(P20)
• Is there any memory remaining on the built-in memory or the card?
>
Delete the pictures which are not necessary to increase the available memory. (P34)
• You may not be able to record for a short while after turning the power [ON] when using a large
capacity card.
• The picture can become whitish if there is dirt e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel and gently wipe the lens surface
with a soft dry cloth.
>
Check that the exposure is correctly compensated. (P86)
• Setting the [Min. Shtr Speed] to faster speed might make the picture darker.
> Set the [Min. Shtr Speed] (P88) to slower speed.
>
Set [Auto Bracket] (P87) or [Burst] (P90) of the [Rec] Mode menu to [Off].
• Has [Hi-Speed Burst]
(P62) or [Flash Burst] (P63) in Scene Mode been set?
If the problem is not resolved, it may be improved by selecting [Reset] (P45) on the
[Setup] menu when taking pictures .
Battery and power source
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
This unit is turned off automatically.
Card/battery door does not close.
Recording
The picture cannot be recorded.
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.