Panasonic LUMIX DMC-FX33 Operating Instructions Manual Download

Page: 147 / 155

- 147 -

Others

3: The motion pictures cannot be played

back on a TV.

• Are you trying to play back the motion

pictures by directly inserting the card in
the card slot of the TV?
– Connect the camera to the TV with the

AV cable (supplied) and then play back
the pictures on the camera.

(P134)

4: The picture is not displayed fully on the

TV.

• Set the aspect of the TV on the camera.

(P26)

5: The picture cannot be transferred

when the camera is connected to a PC.

• Is the camera connected to the PC

correctly?

• Is the camera recognised by the PC

correctly?

6: The card is not recognised by the PC.

(The built-in memory is recognised.)
• Disconnect the USB connection cable.

Connect it again while the card is inserted
in the camera.

7: The picture cannot be printed when the

camera is connected to a printer.

• Does the printer support PictBridge?
• Reset the mode to [

(P129)

8: The ends of the pictures are cut at

printing.

• When using a printer with a trimming or

borderless printing function, cancel this
function before printing. (For details, refer
to the operating instructions for the
printer.)

• When you order photo studios to print

pictures, ask the photo studio if the
pictures can be printed with both ends.

∫

Others

1: An unreadable language was selected

by mistake.

• Press [MENU/SET], select the [SETUP]

menu icon [

] and then select the [

]

icon to set the desired language.

(P26)

2: The setting for the auto review function

is disabled.

• Are you taking pictures using auto bracket

(P54)

? Is the camera in burst mode

(P86)

or motion picture mode [

]

(P69)

[SELF PORTRAIT]

(P58)

[HI-SPEED BURST]

(P64)

in scene

mode?
Is [AUDIO REC.] set to [ON]

(P82)

– In these cases, you cannot set the auto

review function in the [SETUP] menu.

3: A red lamp sometimes turns on when

the shutter button is pressed halfway.

• In dark places, the AF assist lamp

(P87)

lights red to make it easier to focus on a
subject.

4: The AF assist lamp does not turn on.

• Is [AF ASSIST LAMP] on the [REC] mode

menu set to [ON]?

(P87)

• Are you taking pictures in dark places?

– The AF assist lamp does not turn on in

bright places.

• The AF assist lamp does not turn on when

[SELF PORTRAIT], [SCENERY], [NIGHT
SCENERY], [SUNSET], [FIREWORKS] or
[AERIAL PHOTO] in scene mode is
selected.

(P56)

Summary of Contents for LUMIX DMC-FX33




























































































































































Search results

Summary of Contents for LUMIX DMC-FX33

Reviews:

Related manuals for LUMIX DMC-FX33

Brands by name

Popular brands

Panasonic LUMIX DMC-FX33, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FX33

Reviews:

Related manuals for LUMIX DMC-FX33

Brands by name

Popular brands