Panasonic LUMIX DMC-FX33 Operating Instructions Manual Download

Page: 142 / 155

Others

- 142 -

[MEMORY CARD PARAMETER ERROR]

Use a card compatible with this unit.

(P4, 15)

• You can only use an SDHC Memory Card if

using cards with 4 GB or more capacity.

[MEMORY CARD ERROR
PLEASE CHECK THE CARD]

• An error has occurred accessing the card.

Insert the card again.

[READ ERROR
PLEASE CHECK THE CARD]

An error has occurred reading the data.
Insert the card again. Make sure the card is
inserted properly and then play back again.

[WRITE ERROR
PLEASE CHECK THE CARD]

An error has occurred writing the data.
Turn the camera off and remove the card.
Insert the card again and turn the camera on.
Make sure the camera is turned off before
removing or inserting the card to avoid
damage.

[MOTION RECORDING WAS CANCELLED
DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]

• When you set the picture quality to

[30fpsVGA] or [30fps16:9], we recommend
using a high-speed card with “10MB/s” or
greater displayed on the package.

• Depending on the type of SD Memory Card

or SDHC Memory Card, motion picture
recording may stop in the middle.

[A FOLDER CANNOT BE CREATED]

A folder cannot be created because there are
no remaining folder numbers that can be
used.

(P126)

Format the card after saving necessary data
on a PC etc.

(P124)

If you execute [NO.RESET] in the [SETUP]
menu after formatting, the folder number is
reset to 100.

(P25)

[PICTURE IS DISPLAYED FOR 4:3 TV]/
[PICTURE IS DISPLAYED FOR 16:9 TV]

• The AV cable is connected to the camera.

Press [MENU/SET] if you want to delete this
message at once.

• Select [TV ASPECT] in the [SETUP] menu if

you want to change the TV aspect.

(P26)

• This message also appears when the USB

connection cable is connected to the camera
only.
In this case, connect the other end of the
USB connection cable to a PC or a printer.

(P125, 129)

[PLEASE RE-CONNECT THE PRINTER.]

This message will be displayed if you change
the mode dial to print mode [

], while this

unit is connected to a PC. If connecting the
printer again, change the mode to a mode
other than [

] and then check that no data

is being transferred.
( [ACCESS] appears on the LCD monitor of
this unit while data is being transferred.)

[USB MODE CHANGED. PLEASE REMOVE
THE USB CABLE.]

This message will be displayed if you change
the mode dial to a mode other than print
mode [

] while this unit and the printer are

connected.
Set the mode dial to [

] again and then

disconnect the USB connection cable. If
printing, stop the printing and then disconnect
the USB connection cable.

[PRINTER BUSY]/[PLEASE CHECK THE
PRINTER]

The printer cannot print. Check the printer.

Summary of Contents for LUMIX DMC-FX33




























































































































































Search results

Summary of Contents for LUMIX DMC-FX33

Reviews:

Related manuals for LUMIX DMC-FX33

Brands by name

Popular brands

Panasonic LUMIX DMC-FX33, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FX33

Reviews:

Related manuals for LUMIX DMC-FX33

Brands by name

Popular brands