Panasonic LUMIX DMC-FT1 Operating Instructions Manual Download

Page: 52 / 152

VQT1Z56

Advanced (Recording pictures)

∫

The available flash range to take pictures

•

The available flash range is an approximation.

•

In [HIGH SENS.] (P64) in scene mode, the ISO sensitivity automatically switches to between

[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 13.0 m (42.6 feet)

Tele: Approx. 90 cm (2.96 feet) to approx. 7.3 m (23.9 feet)

•

In [FLASH BURST] (P65) in scene mode, the ISO sensitivity automatically switches to between

[ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 30 cm (0.99 feet) to approx. 3.4 m (11.2 feet)

Tele: Approx. 30 cm (0.99 feet) to approx. 1.9 m (6.23feet)

∫

Shutter speed for each flash setting

1 It may vary depending on the [MIN. SHTR SPEED] setting (P92).

2 When Intelligent ISO is set (P84)

•

2: The shutter speed becomes a maximum of 1 second in the following cases.

–

When the optical image stabilizer is set to [OFF].

–

When the camera has determined that there is little jitter when the optical image stabilizer is

set to [MODE1], [MODE2] or [AUTO].

•

In Intelligent auto mode, shutter speed changes depending on the identified scene.

•

The shutter speed for [SPORTS], [SNOW], [BEACH & SURF] and scene modes will be

different from above table.

ISO sensitivity

Available flash range

Wide

Tele

AUTO

30 cm (0.99 feet) to 5.1 m (16.7 feet)

30 cm (0.99 feet)

to 2.8 m

(9.18 feet)

ISO80

30 cm (0.99 feet) to 1.4 m (4.59 feet)

30 cm (0.99 feet)

to 80 cm

(2.62 feet)

ISO100

30 cm (0.99 feet) to 1.6 m (5.24 feet)

30 cm (0.99 feet)

to 90 cm

(2.96 feet)

ISO200

40 cm (1.32 feet) to 2.3 m (7.54 feet)

40 cm (1.32 feet)

to 1.2 m

(3.94 feet)

ISO400

60 cm (1.97 feet) to 3.2 m (10.4 feet)

60 cm (1.97 feet)

to 1.8 m

(5.91 feet)

ISO800

80 cm (2.62 feet) to 4.6 m (15.1 feet)

60 cm (1.97 feet)

to 2.5 m

(8.20 feet)

ISO1600

1.15 m (3.77 feet) to 6.5 m

(21.3 feet)

90 cm (2.96 feet)

to 3.6 m

(11.8 feet)

Flash setting

Shutter speed (Sec.)

Flash setting

Shutter speed (Sec.)

‡

1/30 to 1/1300th

1 to 1/1300th

1 or 1/4th to 1/1300th

‰

DMC-FT1&TS1EB-VQT1Z56_eng.book 52 ページ２００９年２月２日　月曜日　午前９時４７分

Summary of Contents for LUMIX DMC-FT1

























































































































































Search results

Summary of Contents for LUMIX DMC-FT1

Reviews:

Related manuals for LUMIX DMC-FT1

Brands by name

Popular brands

Panasonic LUMIX DMC-FT1, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FT1

Reviews:

Related manuals for LUMIX DMC-FT1

Brands by name

Popular brands