VQT1Z56
50
Advanced (Recording pictures)
[REC] mode:
ñ·
¿¨
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press
1
[
‰
].
Press
3
/
4
to select a mode.
•
You can also press
1
[
‰
] to select.
•
For information about flash settings that can be selected, refer to
“
Available flash settings by recording mode
”
. (P51)
Press [MENU/SET].
•
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
A
Photo flash
Do not cover it with your fingers or other objects.
Switching to the appropriate flash setting
Item
Description of settings
‡
: AUTO
The flash is automatically activated when the recording conditions make
it necessary.
:
AUTO/Red-eye
reduction
¢
The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye
phenomenon (eyes of the subject appearing red in the picture) and then
activated again for the actual recording.
•
Use this when you take pictures of people in low lighting conditions.
‰
: Forced flash ON
:
Forced ON/Red-eye
reduction
¢
The flash is activated every time regardless of the recording conditions.
•
Use this when your subject is back-lit or under fluorescent light.
•
The flash setting is set to [
] only when you set [PARTY] or
[CANDLE LIGHT] in scene mode. (P59)
:
Slow sync./Red-eye
reduction
¢
If you take a picture with a dark background landscape, this feature will
slow the shutter speed when the flash is activated so that the dark
background landscape will become bright. Simultaneously it reduces the
red-eye phenomenon.
•
Use this when you take pictures of people in front of a dark
background.
Œ
: Forced flash OFF
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the use of the
flash is not permitted.
DMC-FT1&TS1EB-VQT1Z56_eng.book 50 ページ ２００９年２月２日 月曜日 午前９時４７分
