Panasonic Lumix DC-GH5 Owner'S Manual Download

Page: 217 / 347

217

9. Using Menu Functions

Applicable modes:

Select the shutter to be used for taking pictures.

1 This setting is available only in Manual Exposure Mode.

(P74)

2 Up to an ISO sensitivity of [ISO3200]. When the setting is higher than [ISO3200], the shutter

speed will be faster than 1 second.

3 Electronic shutter sound settings can be changed in [E-Shutter Vol] and [E-Shutter Tone].

(P237)

• Compared to Mechanical Shutter Mode, Electronic Front Curtain Mode produces less

shutter-induced shake, so it can minimize the influence of shutter vibration.

• Electronic Shutter Mode allows you to take pictures without causing shutter vibration.

[Shutter Type]

[Rec]

[Shutter Type]

[AUTO]

Switches the shutter type automatically depending on the recording condition
and shutter speed.

[MSHTR]

Takes pictures in Mechanical Shutter Mode.

[EFC]

Takes pictures in Electronic Front Curtain Mode.

[ESHTR]

Takes pictures in Electronic Shutter Mode.

Mechanical shutter

Electronic Front

Curtain

Electronic Shutter

Description

The camera starts and
ends an exposure with
the mechanical shutter.

The camera starts an
exposure electronically,
and ends it with the
mechanical shutter.

The camera starts and
ends an exposure
electronically.

Flash

—

Shutter Speed

(Sec.)

B (Bulb)

/60 to 1/8000th B (Bulb)

/60 to 1/2000th

to 1/16000th

Shutter sound

Mechanical shutter

sound

Mechanical shutter

sound

Electronic shutter

sound

• When [

] is displayed on the screen, pictures will be taken with the electronic shutter.

• When a moving subject is recorded with the electronic shutter, the subject may appear

distorted on the picture.

• When the electronic shutter is used under fluorescent or LED lighting, etc., horizontal

stripes may appear on the picture. In such cases, lowering the shutter speed may
reduce the effect of the horizontal stripes.

(P73)

Summary of Contents for Lumix DC-GH5




























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GH5

Reviews:

Related manuals for Lumix DC-GH5

Brands by name

Popular brands

Panasonic Lumix DC-GH5, Owner'S Manual

Search results

Summary of Contents for Lumix DC-GH5

Reviews:

Related manuals for Lumix DC-GH5

Brands by name

Popular brands